Fibre Optic Fasteners

Injection molding Fiber Optic Fastners with The EM80-SVP/2 IMM

A customer in Hubei Province, China, is using 6 EM80-SVP/2 Injection Molding Machines to manufacture fiber optic fasteners in ABS and polycarbonate (PC).

In operation since 2012 and operating in semi-automatic mode, the EM80-SVP/2 Injection Molding Machine is driven by an SVP/2 Servo Drive with a clamping force of 80 tons controlled by a Nippobatta Ai-02. With 4 cavities in use, a cycle time of 46s is achieved with shot weight of 10g for each product at a thickness of 1.5mm.

Fiber Optic Fasteners produced by ChenHsong EM80-SVP/2 Injection Molding Machine
ChenHsong EM-SVP/2 Series Injection Molding Machine Thumbnail

Machine Details

  • The Model of Chenhsong Injection Molding Machine's Type
    Model: EM80-SVP/2
  • The Type of Chenhsong Injection Molding Machine

    Type: Toggle

  • The Year when Chenhsong Injection Molding Machine produced

    Year: 2012

  • The Clamping Force of Chenhsong Injection Molding Machine

    Clamping Force: 80 tons

  • The Power Pack of Chenhsong Injection Molding Machine

    Power Pack: SVP/2 Servo-Drive

  • The Controller of Chenhsong Injection Molding Machine

    Controller: Nippobatta Ai-02

Operator Details

  • The Country where Chenhsong Injection Molding Machine comes from

    Country: CHINA

  • The Location where Chenhsong Injection Molding Machine is

    Location: Hubei Province

  • The Number of Chenhsong Injection Molding Machine

    Number of Machines: 6

Part Details

  • The Part of Chenhsong Injection Molding Machine

    Part: Fibre Optic Fastener

  • The Resin of Chenhsong Injection Molding Machine

    Resin: ABS + PC

  • The Cavities of Chenhsong Injection Molding Machine

    Cavities: 4

  • The Dimensions of Chenhsong Injection Molding Machine

    Dimensions: 61mm x 43mm x 15mm

  • The Shot Weight of Chenhsong Injection Molding Machine

    Shot weight: 10g each

  • The Thickness of Chenhsong Injection Molding Machine

    Thickness: 1.5mm

  • The Cycle Time of Chenhsong Injection Molding Machine

    Cycle Time: 46 sec.

  • The Op Mode of Chenhsong Injection Molding Machine

    Op Mode: Semi-Automatic

Share this Case Study

You may also be interested in the following