Disposable Forks with Automatic Packaging

Disposable Fork Injection Molding with Automatic Packaging

In Zhejiang Province, China, a customer has been employing 20 of our EM260-SVP/2 Toggle Type Injection Molding machines since 2016 to manufacture disposable forks in polypropylene (PP) in 36 cavities with a shot weight of 2.5g each and thickness of 1mm.

In fully automatic mode, the EM260-SVP/2 Injection Molding machine is powered by the SVP/2 Servo Drive and Nippobatta Ai-12 Controller, achieving a clamping force of 260 tons and cycle time of only 12s.

Disposable Forks with Automatic Packaging produced by ChenHsong EM260-SVP/2 Injection Molding Machine
ChenHsong EM-SVP/2 Series Injection Molding Machine Thumbnail

Machine Details

  • The Model of Chenhsong Injection Molding Machine's Type
    Model: EM260-SVP/2
  • The Type of Chenhsong Injection Molding Machine

    Type: Toggle

  • The Year when Chenhsong Injection Molding Machine produced

    Year: 2016

  • The Clamping Force of Chenhsong Injection Molding Machine

    Clamping Force: 260 tons

  • The Power Pack of Chenhsong Injection Molding Machine

    Power Pack: SVP/2 Servo-Drive

  • The Controller of Chenhsong Injection Molding Machine

    Controller: Nippobatta Ai-12

Operator Details

  • The Country where Chenhsong Injection Molding Machine comes from

    Country: CHINA

  • The Location where Chenhsong Injection Molding Machine is

    Location: Zhejiang Province

  • The Number of Chenhsong Injection Molding Machine

    Number of Machines: 20

Part Details

  • The Part of Chenhsong Injection Molding Machine

    Part: Disposable Forks

  • The Resin of Chenhsong Injection Molding Machine

    Resin: PP

  • The Cavities of Chenhsong Injection Molding Machine

    Cavities: 36

  • The Dimensions of Chenhsong Injection Molding Machine

    Dimensions: 148mm x 25mm x 20mm

  • The Shot Weight of Chenhsong Injection Molding Machine

    Shot weight: 2.5g each

  • The Thickness of Chenhsong Injection Molding Machine

    Thickness: 1mm

  • The Cycle Time of Chenhsong Injection Molding Machine

    Cycle Time: 12 sec.

  • The Op Mode of Chenhsong Injection Molding Machine

    Op Mode: Fully-automatic

Share this Case Study

You may also be interested in the following